Let’s Get Started!

First grab a Pen and Paper and draw an outline of your kitchen, you can use boxes to represent each cupboard of drawers of base and overheard cabinetry location.

Start with one row of cabinetry at a time, numbering each row as you go.

See sketch below…

When you have measured all your pieces and noted them down, you can start entering them in online.

Only when you are sure that you have the correct details on your sketch should you start entering them online. Never be tempted to order your new doors the exact size of the unit as you will find that the doors won’t open properly.

The only information needed is that of the height, width and thickness, type of door and whether it is positioned at the base or overhead.

  • Step 1: First choose your Door Type and Profile
    There are 3 options Pantry/Door/Drawer
  • Step 2: Select your handle
  • Step 3: Choose your colour & Finish
  • Step 4: Add Measurements, Door Types and Hinge Placements
    *Note* 
    For piano hinge doors you will enter those measurements at step 5 under piano hinge doors
    At this step you will choose your door type eg. Left Hand Corner and your measurement for that door. You will need to enter each panel individually repeating steps 1 to 5 for each door through to check out which you will press Add Another Door.
    For corner door measurements please follow the same instructions as the standard door measurement process, then you will need to choose the option which is relevant to that door Eg. A corner door has a part with a hinge and a part with a handle, it will be left hand sided or right hand sided, make sure you choose the one that is relevant!
    All hinges and hinge plates will be provided completely new for you, so you can choose whether you want the hinges to sit 100mm, 120mm or 140mm from the top and bottom, note that whatever size you choose it will automatically be the same for the top and the bottom. These measurements are also very important, as you want to avoid having a hinge where your current shelf is located so take your time.
    For custom hinge positions, enter our own measurements where you want the hinges to sit.

  • Step 5: Extra Panels
    This step is where you will enter new side panels, back panels, piano hinge panels and kickboards. *Note* that these panels will reflect the same paint colour that has been chosen in Step 3.
    After you enter each door, panel or kickboard measurement, you will end up at the checkout/add another door page, click add another panel and enter repeat the process until all measurements have been entered.
    Once you have finished you can then checkout.
  • Mark off each measurement on your sketch as it is entered.
  • The main objective is to record all the sizes as accurately and as clearly as possible.
  • After all measurements are entered, checkout and review your order.

    • Step 1: First choose your Door Type and Profile
      There are 3 options Pantry/Door/Drawer
    • Step 2: Select your handle
    • Step 3: Choose your colour & Finish
    • Step 4: Add Measurements, Door Types and Hinge Placements
      *Note* 
      For piano hinge doors you will enter those measurements at step 5 under piano hinge doors
      At this step you will choose your door type eg. Left Hand Corner and your measurement for that door. You will need to enter each panel individually repeating steps 1 to 5 for each door through to check out which you will press Add Another Door.
      For corner door measurements please follow the same instructions as the standard door measurement process, then you will need to choose the option which is relevant to that door Eg. A corner door has a part with a hinge and a part with a handle, it will be left hand sided or right hand sided, make sure you choose the one that is relevant!
      All hinges and hinge plates will be provided completely new for you, so you can choose whether you want the hinges to sit 100mm, 120mm or 140mm from the top and bottom, note that whatever size you choose it will automatically be the same for the top and the bottom. These measurements are also very important, as you want to avoid having a hinge where your current shelf is located so take your time.
      For custom hinge positions, enter our own measurements where you want the hinges to sit.
    • Step 5: Extra Panels
      This step is where you will enter new side panels, back panels, piano hinge panels and kickboards. *Note* that these panels will reflect the same paint colour that has been chosen in Step 3.
      After you enter each door, panel or kickboard measurement, you will end up at the checkout/add another door page, click add another panel and enter repeat the process until all measurements have been entered.
      Once you have finished you can then checkout.
    • Mark off each measurement on your sketch as it is entered.
    • The main objective is to record all the sizes as accurately and as clearly as possible.
    • After all measurements are entered, checkout and review your order.

"We have great passion for the industry and strong dedication to our customers"
69 Watt Road, Mornington

About Us

Tux Lux is one of the leading kitchen renovation companies on the Mornington Peninsula. We strive for beautiful finishes. On time. On budget. Enquire today about our services!

Get a Free Quote